Reference guide · Machinist speeds, tap drills and shop geometry
Cutting speed calculator: spindle RPM from SFM or m/min
By the Mirage Interactive team · Last checked
Cutting speed is how fast the cutting edge moves past the material, in surface feet per minute (SFM) or metres per minute. The machine does not run in SFM, it runs in RPM, so every job needs one conversion: the speed you want, divided by the distance the edge travels on one turn.
This guide gives that conversion both ways, tables of RPM for common diameters, and the shop shortcut with its error. The cutting speed itself comes from the tool maker or the tooling catalogue for your material and tool, so it is an input here, not something the page decides.
The short answer
RPM = 12 x SFM / (pi x diameter in inches), or RPM = 1000 x cutting speed in m/min / (pi x diameter in mm). Going the other way, SFM = pi x diameter in inches x RPM / 12.
A 1/2 inch end mill at 300 SFM turns at 2,292 RPM. A 10 mm cutter at 120 m/min turns at 3,820 RPM. A 2 inch bar at 100 SFM turns at 191 RPM.
Tables
The first table gives spindle RPM for common inch diameters at five cutting speeds in SFM. The second gives the same for metric diameters at five cutting speeds in m/min. The third goes the other way: the cutting speed in SFM that a spindle speed gives at four diameters. Use your browser's print command to print this page: the tables print without the navigation.
| Diameter (in) | 50 SFM | 100 SFM | 200 SFM | 300 SFM | 500 SFM |
|---|---|---|---|---|---|
| 1/8 | 1,528 | 3,056 | 6,112 | 9,167 | 15,279 |
| 1/4 | 764 | 1,528 | 3,056 | 4,584 | 7,639 |
| 3/8 | 509 | 1,019 | 2,037 | 3,056 | 5,093 |
| 1/2 | 382 | 764 | 1,528 | 2,292 | 3,820 |
| 3/4 | 255 | 509 | 1,019 | 1,528 | 2,546 |
| 1 | 191 | 382 | 764 | 1,146 | 1,910 |
| 1 1/2 | 127 | 255 | 509 | 764 | 1,273 |
| 2 | 95 | 191 | 382 | 573 | 955 |
| 3 | 64 | 127 | 255 | 382 | 637 |
Source: computed by the site build from the formulas below.
| Diameter (mm) | 20 m/min | 50 m/min | 100 m/min | 150 m/min | 250 m/min |
|---|---|---|---|---|---|
| 3 | 2,122 | 5,305 | 10,610 | 15,915 | 26,526 |
| 6 | 1,061 | 2,653 | 5,305 | 7,958 | 13,263 |
| 10 | 637 | 1,592 | 3,183 | 4,775 | 7,958 |
| 12 | 531 | 1,326 | 2,653 | 3,979 | 6,631 |
| 16 | 398 | 995 | 1,989 | 2,984 | 4,974 |
| 20 | 318 | 796 | 1,592 | 2,387 | 3,979 |
| 25 | 255 | 637 | 1,273 | 1,910 | 3,183 |
| 50 | 127 | 318 | 637 | 955 | 1,592 |
| 100 | 64 | 159 | 318 | 477 | 796 |
Source: computed by the site build from the formulas below.
| Spindle speed (RPM) | 1/4 in | 1/2 in | 1 in | 2 in |
|---|---|---|---|---|
| 500 | 32.7 | 65.4 | 130.9 | 261.8 |
| 1,000 | 65.4 | 130.9 | 261.8 | 523.6 |
| 2,000 | 130.9 | 261.8 | 523.6 | 1047.2 |
| 3,000 | 196.3 | 392.7 | 785.4 | 1570.8 |
Source: computed by the site build from the formulas below.
Formulas
- Spindle speed, inch
- RPM = 12 x SFM / (pi x D)
- D is the diameter in inches: the cutter diameter on a mill or drill, the workpiece diameter on a lathe. The 12 turns feet into inches.
- Spindle speed, metric
- RPM = 1000 x Vc / (pi x D)
- Vc is the cutting speed in metres per minute and D the diameter in millimetres.
- Cutting speed from RPM
- SFM = pi x D x RPM / 12 Vc = pi x D x RPM / 1000
- Use this to see what a spindle speed really gives, for example when the machine tops out below the RPM you wanted.
- Between the two units
- 1 m/min = 3.28084 SFM (1 / 0.3048)
- The foot is exactly 0.3048 m, so the conversion is exact. 100 m/min is 328.08 SFM.
- Shop shortcut
- RPM = 4 x SFM / D
- 12 / pi is 3.8197, and 4 is the round number. The shortcut runs 4.7 percent high every time: 2,400 RPM instead of 2,292 for the 1/2 inch cutter at 300 SFM.
Worked example
An end mill, a metric cutter and a lathe bar
- A 1/2 inch end mill at 300 SFM: RPM = 12 x 300 / (pi x 0.5) = 3,600 / 1.5708 = 2,292 RPM.
- A 10 mm cutter at 120 m/min: RPM = 1000 x 120 / (pi x 10) = 120,000 / 31.416 = 3,820 RPM.
- A 2 inch bar turned at 100 SFM: RPM = 12 x 100 / (pi x 2) = 191 RPM. As the diameter shrinks on the cut, the RPM for the same SFM rises, which is why a facing cut on a lathe asks for a constant surface speed control or a stepped speed.
- Check the other way. A 3 inch cutter at 400 RPM: SFM = pi x 3 x 400 / 12 = 314.2 SFM.
- The machine tops out at 2,000 RPM and the 1/2 inch cutter wanted 2,292. At 2,000 RPM the cutting speed is pi x 0.5 x 2,000 / 12 = 261.8 SFM. Run it there and take the feed from the chip load for that RPM, or use a larger cutter.
- Between units: 100 m/min is 100 x 3.28084 = 328.08 SFM. A 12.7 mm (1/2 inch) cutter at 100 m/min turns at 2,506 RPM, the same as 328.08 SFM on a 1/2 inch cutter: 2,506 RPM.
Things to watch
- The cutting speed is the number to take from the tool maker for your material, tool and coating. Nothing on this page, and nothing in the formula, tells you what it should be.
- Use the diameter at the cutting edge. On a lathe it is the current workpiece diameter, not the bar you started with. On a mill it is the cutter diameter, or the effective diameter on a ball nose or a chamfer mill at a shallow depth.
- A result is a starting value. The machine, the rigidity of the set-up, the coolant and the tool wear decide what is practical, so try the speed on scrap and adjust.
- Feed comes next, from the chip load, the number of teeth and the RPM. See the milling feed rate guide linked below.
Related guide: Tap drill chart and cutting speed (RPM) formula
More from this family: Milling feed rate calculator: feed, chip load and spindle speed · Bolt circle calculator: hole coordinates and chord spacing · Three-wire thread measurement: best wire size and measurement over wires · Taper per foot calculator: taper, half angle and diameters · Sine bar calculator: gauge block stack height for an angle · Tap drill size for 50, 65 and 75 percent thread
Skip the arithmetic
Cutting Speed, Tap Drill, Sine
Cutting Speed, Tap Drill, Sine turns a cutting speed and a diameter into spindle RPM, in inch or metric, with every step shown, and does feed from chip load, tapping feed and metal removal rate. You enter the cutting speed from your tool maker; it does not pick one for you. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.
Questions
How do you calculate RPM from cutting speed?
Multiply the cutting speed in SFM by 12, then divide by pi times the diameter in inches. For 300 SFM and a 1/2 inch cutter that is 2,292 RPM.
How do you calculate cutting speed from RPM?
Multiply pi, the diameter in inches and the RPM, then divide by 12. A 3 inch cutter at 400 RPM runs at 314.2 SFM.
What is the difference between SFM and m/min?
They measure the same thing, edge speed, in feet or metres per minute. One metre per minute is 3.28084 SFM.
