Skip to content

Reference guide · HVAC duct size calculator

Duct size chart: CFM to round duct diameter

By the Mirage Interactive team · Last checked

To size a duct you need the airflow it must carry and a target for how fast the air loses pressure along it, the friction rate. The usual unit is inches of water gauge per 100 feet of duct. Smaller ducts carry the same air faster and with more friction, which costs fan energy and makes noise.

The chart below gives the round duct diameter for common airflows at three friction rates, for galvanized steel duct and standard air. For rectangular duct, find the equivalent round diameter, then pick sides that match it.

Printable table

Round duct diameter by airflow and friction rate, with the air velocity at 0.10 inches w.g. per 100 ft. Use your browser's print command to print this page: the tables print without the navigation.

Round duct diameter for equal friction: galvanized steel, standard air (20 C, sea level)
Airflow (CFM)0.08 in. w.g. per 100 ft: diameter (in)0.10 in. w.g. per 100 ft: diameter (in)0.15 in. w.g. per 100 ft: diameter (in)At 0.10: velocity (fpm)
1006.05.85.3550
2007.87.56.9656
3009.18.78.0727
40010.19.78.9782
50011.010.59.7827
75012.812.311.3915
1,00014.313.712.6983
1,50016.615.914.61087
2,00018.517.716.31167

Source: The SizeMyDuct engine (Darcy-Weisbach with Colebrook-White friction). The app has no separate reference calculator, so all 27 diameters were re-computed with an independent Python Colebrook-White solver (largest difference 0.00%); the engine itself is covered by its own tests.

Formulas

Air velocity
velocity (fpm) = airflow (CFM) / duct area (square feet)
Friction loss
pressure drop per length = f x (1 / D) x (air density x velocity squared / 2)
The Darcy-Weisbach equation. D is the duct diameter and f the friction factor.
Friction factor
1 / square root of f = -2 x log10( roughness / (3.7 D) + 2.51 / (Re x square root of f) )
The Colebrook-White equation, solved by iteration. Re is the Reynolds number.
Equivalent round diameter of a rectangular duct
De = 1.30 x (a x b) to the power 0.625 / (a + b) to the power 0.25
The Huebscher formula, with a and b the two sides.

Worked example

500 CFM at 0.1 inches w.g. per 100 ft

  1. Solving the friction equation for the diameter gives 10.5 inches (galvanized steel, air at 20 C and sea level).
  2. The air then moves at 827 fpm: area is pi x (10.5 / 24) squared = 0.604 sq ft, and 500 / that area gives the velocity.
  3. A 10 by 10 inch rectangular duct has an equivalent diameter of 10.93 inches and a 20 by 10 inch duct has 15.23 inches (the Huebscher formula, as tested in the calculator's engine tests).
  4. Ducts come in stock sizes, so the next step is to round to the nearest stock size and re-check the friction and velocity that stock size really gives.

Things to watch

  • Values are for galvanized steel duct and standard air (20 C, sea level). Flexible duct is rougher and needs a larger size; altitude and temperature change the air density.
  • A common design range for residential supply ducts is 0.08 to 0.10 inches w.g. per 100 ft; check your own design rules and the local code.
  • Fittings add pressure drop that this table does not include.

Related guide: Rectangular to round duct equivalent size chart · Duct velocity calculator: CFM to FPM for round and rectangular ducts · Duct fitting pressure loss: K factor, velocity pressure and equivalent length · Duct size calculator: round duct diameter from CFM and friction rate · HVAC CFM calculator: how many CFM a round duct carries

Skip the arithmetic

SizeMyDuct

Round or rectangular duct size from airflow and friction rate or velocity, the nearest stock size and what it really gives. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.

Questions

What size duct do I need for 400 CFM?

At 0.10 inches w.g. per 100 ft, about 9.7 inches round in galvanized steel, which means a 10 inch stock size. See the chart for other friction rates.

What is friction rate?

The pressure the air loses per length of duct, usually in inches of water gauge per 100 feet. It is the target that sets the duct size.