Skip to content

Reference guide · Pipe offsets, cut lengths and templates

Pipe offset formula and multiplier chart

By the Mirage Interactive team · Last checked

A pipe offset moves a pipe sideways by a set distance using two angled fittings. The length of pipe between the fittings (the travel) and the distance the offset takes up along the line (the run) both follow from the offset and the fitting angle.

The multipliers in the chart let you work an offset in your head: multiply the offset by the travel multiplier to get the travel.

Printable table

Travel and run for a 10 inch offset at the common fitting angles. Scale linearly for other offsets: a 6 inch offset at 45 degrees has a travel of 6 x 1.4142 = 8.49 inches. Use your browser's print command to print this page: the tables print without the navigation.

Offset multipliers: travel and run for a 10 in offset at each fitting angle
Fitting angle (deg)Travel multiplier (1 / sin)Run multiplier (1 / tan)Travel for a 10 in offset (in)Run for a 10 in offset (in)
511.473711.4301114.74114.30
11.255.12585.027351.2650.27
22.52.61312.414226.1324.14
302.00001.732120.0017.32
451.41421.000014.1410.00
601.15470.577411.555.77
901.00000.000010.000.00

Source: The Pipe Offset app's engine test cases (offset 254 mm = 10 in; 7 of 7 rows are test cases from the app, the rest computed with its reference offset-by-angle calculation).

Formulas

Offset by fitting angle
travel = offset / sin(angle) run = offset / tan(angle)
Dimensions are centre to centre.
Rolling offset
true offset = square root of (rise squared + roll squared) travel = true offset / sin(angle)
Rise is the vertical movement and roll is the sideways movement.
Cut length
cut length = travel - take-out at one end - take-out at the other end
The take-out is the fitting's centre-to-end dimension.

Worked example

A 10 inch offset with 30 degree fittings, and a rolling offset

  1. Travel = 10 / sin 30 = 20.00 in, the multiplier 2. Run = 10 / tan 30 = 17.32 in.
  2. Rolling offset with a rise of 10 in, a roll of 10 in and 45 degree fittings: true offset = square root of (10 squared + 10 squared) = 14.14 in.
  3. Travel = 14.14 / sin 45 = 20.00 in, and the run is 14.14 in.

Things to watch

  • The model is centre-to-centre, with the outside surface of the pipe and no wall thickness. Allow for the fitting take-outs when you cut.
  • The multipliers assume the fitting angle you choose. Fittings sold as 45 degrees or 22.5 degrees have those nominal angles, so measure a fitting you are unsure of.

Related guide: Pipe miter template: cut-back chart and wrap ordinates · Rolling offset calculator: true offset, travel and run for pipe · Pipe fitting take-out chart: cut length between fittings and parallel offsets · Pipe offset calculator: travel, run and fitting angle

Skip the arithmetic

Pipe Offset Layout Calculator

Offsets, rolling offsets, parallel offsets and cut lengths, plus miter and branch wrap templates that print at true scale. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.

Questions

What is the multiplier for a 45 degree offset?

The travel multiplier is 1.4142: multiply the offset by it to get the travel. The run multiplier is 1.

What is the difference between travel and run?

The travel is the length along the angled pipe between the fittings. The run is how far the offset takes up along the line of the original pipe.