Reference guide · Stair rise, run and stringer marks
Stair stringer calculator with a landing
By the Mirage Interactive team · Last checked
A stair with a landing is two straight flights with a level platform between them. The landing splits the total rise, but every riser on both flights should still be the same height, so you work out the unit rise from the total, then give each flight its share of risers.
The landing height is the number of risers in the first flight times the unit rise. Each flight is laid out like an ordinary stair, with one fewer tread than risers, because the landing and the upper floor act as the top step.
The short answer
Total risers N = round(total rise / target riser), unit rise = total rise / N. Split N between the flights, landing height = first flight risers x unit rise. This guide uses a 7.5 inch target riser and a 10 inch tread.
Each flight has one fewer tread than risers. Stringer length = square root of (flight rise squared + flight run squared).
Tables
Total rise in inches against the riser count, the unit rise, the split of risers between the two flights (first / second), the landing height and the stringer length of each flight, for a 7.5 inch target riser and a 10 inch tread. Use your browser's print command to print this page: the tables print without the navigation.
| Total rise (in) | Risers | Unit rise (in) | Risers flight 1 / 2 | Landing height (in) | Stringer 1 length (in) | Stringer 2 length (in) |
|---|---|---|---|---|---|---|
| 60 | 8 | 7.500 | 4 / 4 | 30.00 | 42.4 | 42.4 |
| 72 | 10 | 7.200 | 5 / 5 | 36.00 | 53.8 | 53.8 |
| 84 | 11 | 7.636 | 5 / 6 | 38.18 | 55.3 | 67.8 |
| 96 | 13 | 7.385 | 6 / 7 | 44.31 | 66.8 | 79.2 |
| 108 | 14 | 7.714 | 7 / 7 | 54.00 | 80.7 | 80.7 |
| 120 | 16 | 7.500 | 8 / 8 | 60.00 | 92.2 | 92.2 |
Source: computed by the site build from the formulas below.
Formulas
- Riser count and unit rise
- N = round(total rise / target riser) unit rise = total rise / N
- Rounding to a whole number and then dividing keeps every riser equal.
- Landing
- flight 1 risers = floor(N / 2) flight 2 risers = N - flight 1 risers landing height = flight 1 risers x unit rise
- You can move a riser from one flight to the other if the landing has to be higher or lower.
- Each flight
- treads = risers - 1 run = treads x tread stringer length = square root of (rise squared + run squared)
- Rise is the number of risers in the flight x the unit rise.
Worked example
A 108 inch floor-to-floor stair with a landing
- Total rise 108 inches, target riser 7.5: 108 / 7.5 = 14.40, so N = 14 risers and the unit rise is 7.714 inches.
- Flight 1 has 7 risers and flight 2 has 7. The landing is 7 x 7.714 = 54.00 inches above the lower floor.
- Flight 1 has 6 treads, a run of 60.0 inches and a rise of 54.00 inches, so its stringer is 80.72 inches long.
- Flight 2 has 6 treads, a run of 60.0 inches and a rise of 54.00 inches, so its stringer is 80.72 inches long. The slope of both is 37.6 degrees.
Things to watch
- The depth of a landing is a code question. A typical US residential code asks for a landing as wide as the stair and about 36 inches deep in the direction of travel, but your local code and inspector decide. The calculator does not check landing size or any other code limit.
- Allow for finish flooring and tread thickness: the total rise must run from finished floor to finished floor.
- Try the marks on a scrap board before you cut the stringer.
Related guide: Stair stringer layout: rise, run and code limits
More from this family: Stair rise and run calculator: unit rise, unit run and total run · Stair stringer length calculator: board length, pitch line and throat
Skip the arithmetic
Stair Calculator: Stringers
Stair Calculator: Stringers lays out two straight flights and a level landing, with a result for each flight, the landing height and the total length. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.
Questions
Does the landing count as a tread?
It acts as the top step of the first flight and the starting point of the second, so each flight has one fewer tread than risers.
Do both flights need the same riser height?
Yes. All risers share one unit rise, so the landing height is a whole number of risers above the lower floor.
How deep is the landing?
The guide does not set it. Check your local code. The app does not check landing size.
