Reference guide · Stair rise, run and stringer marks
Stair rise and run calculator: unit rise, unit run and total run
By the Mirage Interactive team · Last checked
Rise is how high each step goes up and run is how far it goes forward. The unit rise and unit run are the same for every step in a flight, so you work them out from two things: the total rise from the lower floor to the upper floor, and a rule that links rise to run.
This guide covers the parts that go wrong when you measure for a stair: which floor surfaces the total rise runs between, how the number of treads follows from the number of risers, and how to find the run from a rise-plus-run figure. For the riser count and the stringer marks, see the stair stringer layout guide.
The short answer
Total rise = measured rise - finish flooring still to lay at the bottom + finish flooring at the top. Unit rise = total rise / number of risers. Treads = risers - 1 when the upper floor is the last step.
Unit run follows from a rule you choose: run = 17 1/2 - rise for a rise-plus-run of 17 1/2 inches, or run = 25 - 2 x rise for a two-rise-plus-run of 25 inches. Total run = treads x unit run.
Tables
The first table gives the unit run and slope angle for unit rises from 6 1/2 to 8 inches under two common rules of thumb: rise plus run of 17 1/2 inches, and twice the rise plus run of 25 inches. These are comfort rules, not code limits. The second table shows what finish flooring does to the unit rise of a 13-riser stair measured at 96 inches. Use your browser's print command to print this page: the tables print without the navigation.
| Unit rise (in) | Run if rise + run = 17 1/2 (in) | Angle (deg) | Run if 2 x rise + run = 25 (in) | Angle (deg) |
|---|---|---|---|---|
| 6.50 | 11.000 (11) | 30.6 | 12.000 (12) | 28.4 |
| 6.75 | 10.750 (10 3/4) | 32.1 | 11.500 (11 1/2) | 30.4 |
| 7.00 | 10.500 (10 1/2) | 33.7 | 11.000 (11) | 32.5 |
| 7.25 | 10.250 (10 1/4) | 35.3 | 10.500 (10 1/2) | 34.6 |
| 7.50 | 10.000 (10) | 36.9 | 10.000 (10) | 36.9 |
| 7.75 | 9.750 (9 3/4) | 38.5 | 9.500 (9 1/2) | 39.2 |
| 8.00 | 9.500 (9 1/2) | 40.1 | 9.000 (9) | 41.6 |
Source: computed by the site build from the formulas below.
| Finish at the bottom (in) | Finish at the top (in) | Total rise (in) | Unit rise, 13 risers (in) | Change from no finish (in) |
|---|---|---|---|---|
| 0.00 | 0.00 | 96.00 | 7.3846 | 0.0000 |
| 0.75 | 0.00 | 95.25 | 7.3269 | -0.0577 |
| 0.50 | 0.00 | 95.50 | 7.3462 | -0.0385 |
| 0.00 | 0.75 | 96.75 | 7.4423 | 0.0577 |
| 0.75 | 0.75 | 96.00 | 7.3846 | 0.0000 |
| 1.00 | 0.50 | 95.50 | 7.3462 | -0.0385 |
Source: computed by the site build from the formulas below.
Formulas
- Total rise and unit rise
- total rise = measured rise - bottom finish + top finish unit rise = total rise / risers
- Measured rise is between the two floor surfaces as they stand when you measure, for example subfloor to subfloor. Flooring still to lay at the bottom raises the lower floor and shortens the stair; flooring at the top lengthens it.
- Unit run from a rule
- rise + run = S: run = S - rise 2 x rise + run = S: run = S - 2 x rise
- S is the figure you choose. You can also type the tread run directly.
- Treads, total run and angle
- treads = risers - 1 total run = treads x unit run angle = arctan(unit rise / unit run)
- If the stair ends on its own top tread, treads = risers.
Worked example
Three stairs, three questions
- A 95 inch rise with 13 risers: unit rise = 95 / 13 = 7.3077 inches (7 5/16 to the nearest 1/16). With a rise-plus-run of 17 1/2 inches the unit run is 17.5 - 7.3077 = 10.1923 inches (10 3/16).
- Twelve treads (13 risers - 1) make a total run of 12 x 10.1923 = 122.31 inches, and the slope is arctan(7.308 / 10.192) = 35.64 degrees. A printed layout that rounds the riser to 7 5/16 before working out the run gets 122 1/4 inches; the unrounded riser gives 122.31.
- Finish flooring: measured 30 3/4 inches from subfloor to subfloor, with 3/4 inch of flooring still to lay at the bottom and 1/2 inch at the top. Total rise = 30.75 - 0.75 + 0.5 = 30.5 inches. With 4 risers the unit rise is 7.625 inches (7 5/8); with a rise-plus-run of 17 5/8 the run is 10 inches, and 3 treads make a total run of 30 inches.
- A 105 inch rise aimed at a 7 inch riser gives 15 risers and a unit rise of 7 inches. With a 10 inch run there are 14 treads and a total run of 140 inches. Rise and run make a 3-4-5 triangle (105 and 140), so the straight line from the foot to the point above the top is 175 inches. That is not the length of the stringer board; see the stringer length guide.
Things to watch
- Rise-plus-run and two-rise-plus-run are rules of thumb for comfort. They are not code limits. Codes set their own maximum riser and minimum tread, and they differ by place; your local authority decides.
- Round the unit rise only when you mark the stringer, and let the first riser absorb the difference so the total still adds up. This guide keeps the unrounded value.
- Measure the total rise between finished floors. A stair whose top step is the upper floor has one fewer tread than risers.
Related guide: Stair stringer layout: rise, run and code limits
More from this family: Stair stringer calculator with a landing · Stair stringer length calculator: board length, pitch line and throat
Skip the arithmetic
Stair Calculator: Stringers
Stair Calculator: Stringers works out the unit rise, unit run, total run, slope angle and rise-plus-run figures from the rise you measured, with the finish flooring still to lay, for deck stairs and house stairs. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.
Questions
How do I calculate stair rise and run?
Divide the total rise by the number of risers to get the unit rise, then take the unit run from a rule such as rise plus run equals 17 1/2 inches, or type the tread run you want. Total run is the unit run times the number of treads.
How many treads are there for 13 risers?
Twelve, when the upper floor forms the last step. If the stair ends on its own top tread there are 13.
Does finish flooring change the rise?
Yes. Flooring still to lay at the bottom shortens the total rise and flooring at the top lengthens it, so measure and then adjust.
