Skip to content

Reference guide · Density altitude and E6B flight computer

Pressure altitude calculator: from altimeter setting and field elevation

By the Mirage Interactive team · Last checked

Pressure altitude is the height in the standard atmosphere that has the same pressure as where you are. It is what the altimeter reads when it is set to 29.92 inches of mercury, and it is the starting point for density altitude and for the performance charts in a flight manual.

When the altimeter setting is not 29.92 you correct for it. There are two ways: a rule that every inch of mercury is worth 1000 feet, and the exact formula from the standard atmosphere. They agree near 29.92 and drift apart away from it. This page shows both side by side. For density altitude itself, see the density altitude guide linked below.

The short answer

Rule: pressure altitude = field elevation + ( 29.92 - altimeter setting ) x 1000 feet. Exact: pressure altitude = 145442 x ( 1 - ( setting / 29.92 )^0.19026 ) + field elevation, in feet, with the setting in inches of mercury.

A field at 500 feet with the altimeter at 30.42 gives 0 feet by the rule and 40.7 feet by the exact formula. The rule is 41 feet low here.

Tables

The first table gives the pressure altitude at sea level for altimeter settings from 28.50 to 31.00, by the exact formula and by the rule, and how much the rule is off. Add the field elevation to either. The second gives the pressure and the temperature of the standard atmosphere at altitude. Use your browser's print command to print this page: the tables print without the navigation.

Pressure altitude at field elevation 0 (ft), by altimeter setting: exact formula, rule and difference
Altimeter setting (inHg)Exact (ft)Rule: 1000 ft per inHg (ft)Rule minus exact (ft)
28.501339142081
28.751100117070
29.0086292058
29.2562567045
29.5039142029
29.7515817012
29.92000
30.10-166-180-14
30.25-304-330-26
30.50-532-580-48
30.75-759-830-71
31.00-985-1080-95

Source: computed by the site build from the formulas below.

Standard atmosphere: pressure (inHg) and temperature (deg C) by altitude (ft)
Altitude (ft)Pressure (inHg)Temperature (deg C)
029.9215.0
100028.8513.0
200027.8211.0
300026.829.1
400025.847.1
500024.895.1
600023.983.1
800022.22-0.8
1000020.58-4.8

Source: computed by the site build from the formulas below.

Formulas

Rule of thumb
PA = elevation + ( 29.92 - setting ) x 1000
Quick and close to 29.92. It is a straight line through a curve, so it is off by tens of feet at the usual settings and more at the extremes.
Exact, standard atmosphere
PA = ( T0 / L ) x ( 1 - ( setting / 29.92 )^( R x L / g ) ) + elevation T0 / L = 145442.16 ft R x L / g = 0.190263
T0 = 288.15 K, L = 0.0065 K per metre, R = 287.05287 and g = 9.80665. The setting and 29.92 are in the same unit, so hectopascals work with 1013.25 in place of 29.92.
Standard temperature
T = 15 - 1.9812 x altitude / 1000 ( deg C, altitude in feet, below 36,089 ft )
Used to see how far the outside air is from standard, which is the next step to density altitude.

Worked example

A field at 500 feet with the altimeter set to 30.42

  1. Rule: 500 + ( 29.92 - 30.42 ) x 1000 = 0 feet.
  2. Exact: 145442 x ( 1 - ( 30.42 / 29.92 )^0.19026 ) + 500 = 40.7 feet, so the exact answer is about 41 feet.
  3. The two differ by 41 feet. For a quick check of a performance chart it is small; for a field at higher elevation or an unusual setting it can be a lot more.
  4. At 28.00 inHg and field elevation 0 the exact pressure altitude is 1824 feet and the rule gives 1920: a 96 foot difference.

Things to watch

  • Use the altimeter setting for the nearest station, the most recent one, and the field elevation of the airfield. A setting that is hours old can be several hundred feet out.
  • This is a planning and training aid. Verify with approved data. It does not say that a loading, a takeoff or a landing is safe or approved.
  • Pressure altitude is not density altitude. Density altitude also needs the outside air temperature: see the density altitude guide linked below.

Related guide: Density altitude formula and ISA table

More from this family: Crosswind component calculator: headwind and crosswind for a runway · Weight and balance calculator: moment, CG and the envelope check

Skip the arithmetic

Density Altitude E6B Computer

Density Altitude E6B Computer gives pressure altitude and density altitude from field elevation, altimeter setting and temperature: the exact standard-atmosphere calculation and the familiar rule of thumb, with the difference between them. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.

Questions

How do you calculate pressure altitude?

Add the correction for the altimeter setting to the field elevation: 1000 feet for every inch of mercury the setting is below 29.92, or use the exact standard-atmosphere formula for a more accurate figure.

What is the pressure altitude with a setting of 29.92?

The field elevation, because the setting is the standard one and there is nothing to correct.

Which is better, the rule or the exact formula?

The exact formula follows the standard atmosphere. The rule is a straight-line shortcut that agrees closely near 29.92 and drifts away from it: about 41 feet at 30.42 with a field at 500 feet, and 96 feet at 28.00.