Reference guide · Density altitude and E6B flight computer
Crosswind component calculator: headwind and crosswind for a runway
By the Mirage Interactive team · Last checked
The wind on an airfield almost never blows straight down the runway. It can be split into two parts: the headwind, along the runway, which slows the ground speed, and the crosswind, across it, which pushes the aircraft sideways. The split depends only on the angle between the runway and the wind.
You will use it before every takeoff and landing, and the aircraft flight manual gives the crosswind it has been demonstrated in. This page gives the formulas, a table of the factors, and the components for common wind speeds. For density altitude and the standard atmosphere, see the density altitude guide linked below.
The short answer
Crosswind = wind speed x sin(angle) and headwind = wind speed x cos(angle), where the angle is the wind direction minus the runway heading. A negative headwind is a tailwind.
Runway 36 with the wind from 030 at 20 knots: the angle is 30 degrees, so the crosswind is 10.0 knots and the headwind is 17.32 knots. At 30 degrees the crosswind is exactly half the wind speed.
Tables
The first table gives the crosswind and headwind factors for angles from 0 to 90 degrees. The second and third give the crosswind and the headwind in knots for steady winds of 10 to 30 knots at seven angles. Use your browser's print command to print this page: the tables print without the navigation.
| Angle (deg) | Crosswind factor: sin | Headwind factor: cos |
|---|---|---|
| 0 | 0.0000 | 1.0000 |
| 10 | 0.1736 | 0.9848 |
| 15 | 0.2588 | 0.9659 |
| 20 | 0.3420 | 0.9397 |
| 30 | 0.5000 | 0.8660 |
| 40 | 0.6428 | 0.7660 |
| 45 | 0.7071 | 0.7071 |
| 50 | 0.7660 | 0.6428 |
| 60 | 0.8660 | 0.5000 |
| 70 | 0.9397 | 0.3420 |
| 80 | 0.9848 | 0.1736 |
| 90 | 1.0000 | 0.0000 |
Source: computed by the site build from the formulas below.
| Wind (kt) / angle (deg) | 10 | 20 | 30 | 40 | 50 | 60 | 90 |
|---|---|---|---|---|---|---|---|
| 10 | 1.7 | 3.4 | 5.0 | 6.4 | 7.7 | 8.7 | 10.0 |
| 15 | 2.6 | 5.1 | 7.5 | 9.6 | 11.5 | 13.0 | 15.0 |
| 20 | 3.5 | 6.8 | 10.0 | 12.9 | 15.3 | 17.3 | 20.0 |
| 25 | 4.3 | 8.6 | 12.5 | 16.1 | 19.2 | 21.7 | 25.0 |
| 30 | 5.2 | 10.3 | 15.0 | 19.3 | 23.0 | 26.0 | 30.0 |
Source: computed by the site build from the formulas below.
| Wind (kt) / angle (deg) | 10 | 20 | 30 | 40 | 50 | 60 | 90 |
|---|---|---|---|---|---|---|---|
| 10 | 9.8 | 9.4 | 8.7 | 7.7 | 6.4 | 5.0 | 0.0 |
| 15 | 14.8 | 14.1 | 13.0 | 11.5 | 9.6 | 7.5 | 0.0 |
| 20 | 19.7 | 18.8 | 17.3 | 15.3 | 12.9 | 10.0 | 0.0 |
| 25 | 24.6 | 23.5 | 21.7 | 19.2 | 16.1 | 12.5 | 0.0 |
| 30 | 29.5 | 28.2 | 26.0 | 23.0 | 19.3 | 15.0 | 0.0 |
Source: computed by the site build from the formulas below.
Formulas
- Wind angle
- angle = wind direction (from) - runway heading
- Runway 36 is heading 360 degrees, runway 30 is 300 degrees. Use the wind direction and the runway heading on the same basis, both magnetic or both true.
- Components
- crosswind = speed x |sin(angle)| headwind = speed x cos(angle)
- A negative headwind is a tailwind. The sign of the sine says which side the crosswind comes from, so keep it if you need to know the side.
- Rule of thumb
- angle 30 degrees: crosswind = speed / 2
- sin 30 degrees = 0.5 exactly. For other angles use the table: the rule of 1/2, 3/4 and 1 for 30, 45 and 60 degrees is only a rough one.
Worked example
Runway 36 with 20 knots from 030, then runway 30 with 25 knots from 060
- Runway 36, wind 030 at 20 knots: the angle is 30 degrees. Crosswind = 20 x sin 30 = 10.0 knots. Headwind = 20 x cos 30 = 17.3205 knots.
- Runway 30, wind 060 at 25 knots: the angle is 60 - 300 = -240, which is 120 degrees the other way. Headwind = 25 x cos 120 = -12.5 knots, a tailwind of 12.5 knots.
- Crosswind on runway 30 = 25 x sin 120 = 21.6506 knots.
- The same wind that gives a headwind on runway 36 would give a tailwind on the reciprocal runway: check which runway you are using before you read the sign.
Things to watch
- The components are for a steady wind. Gusts add to both: use the gust speed for the crosswind you need to be able to handle, and the steady wind for performance.
- This is a planning aid. It does not say that a takeoff or a landing is safe or approved. Your flight manual and your own limits decide.
- Tower and ATIS winds are usually given as magnetic directions, while METAR and TAF winds are true. Do not mix the two when you subtract the runway heading.
Related guide: Density altitude formula and ISA table
More from this family: Pressure altitude calculator: from altimeter setting and field elevation · Weight and balance calculator: moment, CG and the envelope check
Skip the arithmetic
Density Altitude E6B Computer
Density Altitude E6B Computer gives the runway headwind and crosswind, and the heading and ground speed from the wind triangle, with the formula shown. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.
Questions
How do you calculate crosswind component?
Multiply the wind speed by the sine of the angle between the wind direction and the runway heading.
What is the crosswind for a 30 degree wind angle?
Half of the wind speed, because sin 30 degrees is 0.5. A 20 knot wind at 30 degrees gives a 10 knot crosswind and a 17.3 knot headwind.
What does a negative headwind mean?
A tailwind. The wind is blowing from behind the aircraft on that runway, at the size of the number.
