Skip to content

Reference guide · Density altitude and E6B flight computer

Density altitude formula and ISA table

By the Mirage Interactive team · Last checked

Density altitude is the altitude at which the standard atmosphere has the same air density as you have now. A hot day at a high airfield makes the air thin, so the aircraft behaves as if the airfield were much higher: longer takeoff roll, weaker climb.

You find it in two steps: correct the field elevation for the altimeter setting to get the pressure altitude, then correct for how far the temperature is from standard.

Printable tables

The standard atmosphere by altitude, and density altitude by pressure altitude and temperature (dry air). Use your browser's print command to print this page: the tables print without the navigation.

International Standard Atmosphere by altitude
Altitude (ft)Temperature (deg C)Pressure (inHg)Pressure (hPa)Density ratio (to sea level)
015.029.921013.21.0000
2,50010.027.32925.00.9289
5,0005.124.90843.10.8617
7,5000.122.65767.10.7983
10,000-4.820.58696.80.7385
15,000-14.716.89571.80.6292
20,000-24.613.75465.60.5328
25,000-34.511.10376.00.4481
30,000-44.48.89300.90.3741
35,000-54.37.04238.40.3099
40,000-56.55.54187.50.2462

Source: The Density Altitude app's engine test cases for the standard atmosphere (ISA).

Density altitude (ft) by pressure altitude and outside air temperature, dry air
Pressure altitude (ft)OAT 0 deg COAT 15 deg COAT 25 deg COAT 35 deg C
0-1838011612275
2,000659246636074703
4,0003148492460467122
6,0005628737484769533
8,000810198151089811937

Source: The Density Altitude app's reference calculator (density altitude), the one behind the app's atmosphere test cases.

Formulas

Pressure altitude (rule of thumb)
PA = field elevation + (29.92 - altimeter setting in inHg) x 1000
Standard temperature (ISA)
ISA temperature = 15 - 2 x (altitude in thousands of feet) degrees C
The exact standard lapse rate is 1.98 C per 1000 ft up to 36,089 ft.
Density altitude (rule of thumb)
DA = PA + 120 x (OAT - ISA temperature at PA)
OAT is the outside air temperature in degrees C.
Density altitude (exact)
the altitude at which the standard atmosphere has the actual air density
Found from the pressure, temperature and (optionally) humidity with the gas law, then looked up in the standard atmosphere.

Worked example

Pressure altitude 5,000 ft at 30 C

  1. Standard temperature at 5,000 ft is about 5.1 C, so the temperature is 24.9 C above standard.
  2. Rule of thumb: DA = 5,000 + 120 x 25 = 8000 ft.
  3. Exact standard atmosphere: 7801 ft (density ratio 0.791). The shortcut is 199 ft off.
  4. Pressure altitude from a field elevation of 1,000 ft and an altimeter setting of 29.42 inHg: rule of thumb 1500 ft, exact 1466 ft.

Things to watch

  • Humidity makes the air slightly less dense, so moist air gives a higher density altitude than the dry-air numbers here.
  • This is a planning and training aid. Verify with approved data and your flight manual.

Related guide: Crosswind component calculator: headwind and crosswind for a runway · Pressure altitude calculator: from altimeter setting and field elevation · Weight and balance calculator: moment, CG and the envelope check

Skip the arithmetic

Density Altitude E6B Computer

Density altitude two ways side by side, plus wind, fuel, weight and balance, with the working shown. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.

Questions

How do I calculate density altitude?

Find the pressure altitude from the field elevation and altimeter setting, then add 120 feet for every degree C the outside air temperature is above the standard temperature at that altitude.

What is standard temperature at sea level?

15 C (59 F), falling about 2 C for every 1,000 ft you climb, up to 36,089 ft.