Skip to content

Reference guide · Great circle, sight reduction and passage planning

Great circle and rhumb line distance: formulas and worked passages

By the Mirage Interactive team · Last checked

A great circle is the shortest route between two points on the globe. A rhumb line is the route that holds one constant compass course. A rhumb line is always as long as or longer than the great circle, and the difference grows with distance and with latitude.

For short passages the difference is negligible and plane sailing is enough. For ocean passages the table below shows how many miles the great circle saves.

Printable table

Great circle and rhumb line compared on six passages. Positions are approximate port positions, so distances are for comparing the two methods, not for passage planning. Use your browser's print command to print this page: the tables print without the navigation.

Great circle against rhumb line on six passages (nautical miles, degrees true)
Passage (approximate port positions)Great circle (nm)Initial course (deg)Rhumb line (nm)Rhumb course (deg)Rhumb line longer by (nm)
New York to Southampton297252.3309578.6123
Cape Town to Perth4693120.7493188.6238
San Francisco to Honolulu2079251.82096241.917
Lisbon to Bermuda2703279.62754262.051
Sydney to Auckland1163105.6117198.88
Miami to Nassau160105.1161105.61

Source: The Marine Navigation app's reference calculator (great circle and Mercator sailing), the one behind the app's great-circle and sailing test cases.

Formulas

Great circle distance
cos(d) = sin(lat1) sin(lat2) + cos(lat1) cos(lat2) cos(dlon) distance (nm) = 60 x d (degrees)
One minute of arc is one nautical mile in this model.
Plane sailing (short distances)
dlat (minutes) = distance x cos(course) departure = distance x sin(course)
Rhumb line (Mercator sailing)
course = arctan( dlon / dm ) distance = dlat / cos(course)
dm is the difference in meridional parts between the two latitudes; dlon and dlat are in minutes of arc.

Worked example

Plane sailing, from published examples (Bowditch, American Practical Navigator, chapter 24)

  1. Course 5 degrees, distance 188 nm: dlat = 187.3 minutes, departure = 16.4 nm. Published reference: Bowditch ch. 24 (NGA, 2002 edition PDF), p. 351 Example 1 (traverse table 187.3, 16.4).
  2. Reverse: dlat -173.3 minutes and departure 98.6 nm give course 150.4 degrees and distance 199.4 nm. Published reference: Bowditch ch. 24 (NGA, 2002 edition PDF), p. 361.
  3. Each of these published results is one of the reference cases the app's calculation engine is checked against.

Things to watch

  • A great circle changes course continuously. In practice a passage is planned as a series of rhumb line legs along the great circle.
  • This is a planning and training aid. It is not for primary navigation: verify with official charts and publications.

Related guide: CPA and TCPA calculator: closest point of approach and time to it · Sight reduction worked example: Hc, Zn and intercept step by step · Nautical miles calculator: distance, conversion and passage time · Great circle sailing calculator: vertex, waypoints and saving

Skip the arithmetic

Nautical Navigation Calculator

Great circle, rhumb line, sight reduction, CPA and current, with the formula and every step shown, and a passage plan you can print. One-time purchase · No subscription · Price shown in your store. Works offline, no ads, no account.

Questions

Is a great circle always shorter than a rhumb line?

It is never longer. Along the equator or along a meridian they are the same line; everywhere else the great circle is shorter.

How is a nautical mile defined here?

As one minute of arc of a great circle on the model sphere, which is 1.852 km.